Instructions: Make your door handle hanger

Door handle hanger instructions: 

Print the door hanger templates, cut them out, laminate, cut them out again, and use.

or

More detailed instructions below:

Equipment required:
- Printer
- A4 paper
- Scissors
- Laminator

1. Open or save the door hanger template.

2. Print the template onto A4 size paper. Select portrait page orientation. Print in colour for full effect.

3. Use scissors to cut out the hanger/s along the marked lines. Take care to cut precisely along the lines.

4. Place or fold each half of the cut out hanger back-to-back on a single lamination sleeve. Align the halves of the cut out hanger precisely. Stick the two halves together with a glue stick to help maintain alignment and end up with a more durable hanger. Run it through the laminator inside a new lamination sleeve.

5. Use scissors to again cut out the laminated hanger beyond the hanger extents. Cut a few millimetres just outside the extents of the paper into the space where the sides of the laminator sleeve are in contact.

6. Congratulations. Your door handle hanger is ready to use.